Cost of EHU at CLs

Posted on 12/12/2019 12:15 by

David just in case BB does not see your post.

You normally need the "Jumbo" adaptor and the associated pigtail.  

https://gasproducts.co.uk/gaslow-jumbo-adaptor.html?currency=GBP&gclid=CjwKCAiA58fvBRAzEiwAQW-hzcOVM6S0GuZc0hLLWHiXzP_I2N5VuJJMV-YEn5oEL3SR2_-IaYmt6BoCSFQQAvD_BwE

That said do be careful.  In Portugal Repsol had come up with something entirely different for their propane cylinders and the idea may have spread across the border.  

Posted on 12/12/2019 12:15 by

David just in case BB does not see your post.

You normally need the "Jumbo" adaptor and the associated pigtail.  

https://gasproducts.co.uk/gaslow-jumbo-adaptor.html?currency=GBP&gclid=CjwKCAiA58fvBRAzEiwAQW-hzcOVM6S0GuZc0hLLWHiXzP_I2N5VuJJMV-YEn5oEL3SR2_-IaYmt6BoCSFQQAvD_BwE

That said do be careful.  In Portugal Repsol had come up with something entirely different for their propane cylinders and the idea may have spread across the border.  

Posted on 12/12/2019 12:31

• Quote
• Report
• Like

Thanks DD, yes that what i have.

David, it takes a firm push to get it on and the large plastic collar has to be lifted to allow it to drop on and then make sure its pulled back up to secure the fitting....mine was a bit tight (unused for a while) and got a lesson from my neighbour

Re: your other question, youll see that there is a male threaded fitting (known as a 'butane' conmection) and this will not fit the normal POL UK hose that you probably have...

there is a 'POL to butane' adaptor link (picture below) that you screw ypur hose into and then the connector can fit the Jumbo adaptor

Gallery

Posted on 12/12/2019 12:29 by

 Is that all I need will the normal hose (that fits calor) connect to that?

Posted on 12/12/2019 13:30 by

The thread on the Adaptor may be different from the calor fitting that is why I said you also need the associated pigtail.