E Movis Tag

The user and all related content has been Deleted User

My first motorhome had a cab overhang which made it difficult to get line of sight if fitted in the recommended area of the windscreen. What I did was to fix at windscreen wiper level (which after all is still probably higher than the average car?) and it worked fine.

David

Thanks David. Was that in the dotted area ?. I'd agree with the logic on the comparable height of a car windscreen.

If your MH is as in your Avatar with just that small overhang, ours works fine in the dotted area. However, we don’t put it fully onto the clip ( never fallen off yet) so it could be easily taken off and waved out the window if required. If pushed fully on, it is almost impossible to get off.

Thanks Steve, yes, its the one in the pic. When you say the dotted area, do you mean the thin strip at the very top of the screen or the matt black bit round the rear view mirror ?.

Sorry Steve, A bit of new year fog that hasn't lifted yet ...I think I mis-understood ?.

Do you mean the dotted bit that runs round the matt black bit, so it sticks to the black bit but overlaps onto the dots ?.

Matt

It’s on a dotted area about level with the middle / bottom of the mirror. So about 12 cm or so below the top of the screen. Ours is stored in a compound, so I can’t check, however I don’t recall a Matt black section. Probably best for the passenger to try holding it in position for the first toll and see if it works, before sticking on the clip. Or order a second clip with the tag.

Thanks Steve for your help. Mine's in the compound as well so I cant take a pic. 

Place the tag by hand somewhere on the windscreen as you approach the barrier. When you find a place where it works stick it there. 

The user and all related content has been Deleted User