2015 Autotrail Scout Rear Lights

Drill a small hole at the bottom, let the water out, dry it by blowing a hairdryer at it, then put a bung in the hole.  If any sort of access at rear smear it with sealant.

All assuming it isn't still under warranty...?

When I have done that on a caravan and a motorhome I have never bothered with a bung. Thought it better to let any water which collects to drain straight away plus it should allow ventillation and help keep the inside dry. My holes were done with a 1/8 inch drill.

peedee

They look far far too expensive to be drilling drain holes in them. How about finding the entry point & seal it? Surely the handbook/manual should tell you how they come out

If it is anything like the Mohican I had, you're more likely to break the light in trying to remove it. The screws holding the fittings corrode and can be very difficult to remove.

peedee

Thanks for your replies. I've re-checked my documentation and can't find anything relating to their removal. I guess my next step is to contact the dealer