DRL installation in Ayrshire/Glasgow area
14 replies
dougA replied on 30/09/2017 23:25
Wex replied on 01/10/2017 11:51
EmilysDad replied on 01/10/2017 13:52
dougA replied on 01/10/2017 14:17
cyberyacht replied on 01/10/2017 16:19
Randomcamper replied on 01/10/2017 16:51
Posted on 01/10/2017 16:51
The Ledcom ones are fairly easy to fit yourself, the instructions are comprehensive, I have fitted both types to my vans (different vans, not both to the same van), the top type that fit in the bumper "step" and the lower type that fit in the fog light knockouts.....the only problen being that the bottom ones are too big for the knockouts, you have to use a holesaw. It takes a lot of courage to approach the bumper of a £40k van with your drill whirring!
Of the two I prefer the bottom (round) type, they seem brighter and with a wider spectrum.
I guess if you have both you will certainly be seen!
dougA replied on 02/10/2017 18:45
Posted on 02/10/2017 18:45
Thanks Tintent115 for the feedback on both dlr’s, I’m not too good at diy ha ha so ill leave it to the professionals.
i contacted BC motorhome and they don’t touch the chassis part of the MH.
i have booked it in to my local Peugeot dealer to have them fitted then I know it should be fitted correctly and no hassle in the future when in for service/ mot etc.
thanks again all for your advice and I’ll post a picture once completed on Friday 👍
1 person likes this
dougA replied on 06/10/2017 15:55
Posted on 30/09/2017 23:02 by dougA
cyberyacht replied on 06/10/2017 17:58
dougA replied on 06/10/2017 18:02
Posted on 30/09/2017 23:02 by dougA
dougA
Caravanner